Paper Trays
Fold-Up Tray
The Fold-Up tray, at the front of the printer, contains the IN and OUT trays. The
Fold-Up tray must always be lowered to print or to access the ink cartridges.
IN Tray
To print, place paper or other media types in the IN tray. Lower the Fold-Up tray
and pull out the IN tray. Be sure to slide the paper guides out of the way before
loading the media print side down. Slide all media as far as it will go into the IN
tray. Once you insert the media you want to use, slide the paper guides so they
rest snugly against the media. When printing on small media, make sure the IN
tray is pushed back in.
When printing on legal-sized paper, leave the IN tray pulled out.
Fold-Up tray in up
position
Paper width guide
Paper length guide
IN tray pushed in
IN tray pulled out
Paper width guide
IN tray pulled out
Printing Basics
1
3
OUT Tray
The printer sends finished pages to the OUT tray.
OUT Tray Flap Down – This is the typical position for most types of printing. The
down position also allows single envelope printing and printing on media smaller
than 100 x 148 mm or 4 x 5 5/8 inches. For information about printing on other
media, see Chapter 2.
Out Tray Flap Up – The OUT Tray Flap must be in the up position to properly load
banner paper. The OUT Tray Flap must remain in the up position to print banners.