Remove the replacement print cartridge from its packaging and carefully
remove the protective vinyl tape.
Do NOT
touch the print cartridge ink nozzles or copper contacts. Touching
these parts will result in clogs, ink failure, and bad electrical connections.
Also,
do NOT
remove the copper strips; these are required electrical
contacts.
6
Push the print cartridge firmly, straight down into the print cartridge cradle.
7
Close the cradle latch. When the latch is fully closed, you will hear a click.
8
Load plain white paper in the IN tray.
9
Close the top cover, then a calibration page will print.
10
If the Print Cartridge Status
Light continues to blink after you install the
new print cartridge, check the part number on the print cartridge to ensure you
installed the correct one.
Do NOT
touch the
ink nozzles
Do NOT
touch or
remove the copper
contacts
Remove the protective
vinyl tape
Black
Tri-Color